Service Manual Number 11 Removal Installation And Adjustments

More documents

Recommendations

Info

REMOVAL, INSTALLATION AND ADJUSTMENTS SERVICE MANUAL NUMBER 119. Thru-prop exhaust models: Install exhaust pipe. Torque bolts to 20-25 lb. ft. (27-34N·m).Typical V6 and V8 Gasoline Enginesa - Exhaust Pipeb - Boltsb22028ab72057a71945Typical Diesel Enginea - Exhaust Pipeb - BoltsPage 2A-20 90-17431--4 MARCH 1998
SERVICE MANUAL NUMBER 11REMOVAL, INSTALLATION AND ADJUSTMENTS10. Thru-transom exhaust models: Install exhaust block-off plate, if removed. Torquebolts to 20-25 lb. ft. (27-34 N·m).cba22030a - Block-off Plateb - Boltsc - No Bolt in This Hole on Earlier ModelsIMPORTANT: Make hydraulic hose connections as quick as possible to prevent oilfrom leaking out of the system.CAUTIONInstalling trim pump hoses improperly can damage the hose fittings and causeleaks or loose lines. Do not cross thread or overtighten the hose fittings.11. Connect the power trim pump hydraulic hoses. Torque both hose fittings to 100-150 lb.in. (11-16 N·m).aba-“Down” Pressure Hydraulic Line (Grey)b-“Up” Pressure Hydraulic Line (Black)2203190-17431--4 MARCH 1998 Page 2A-21
Page 1 and 2: SERVICE MANUAL NUMBER 11REMOVAL, IN
Page 3 and 4: SERVICE MANUAL NUMBER 11Transom Spe
Page 13 and 14: SERVICE MANUAL NUMBER 1112. On Dies
Page 15 and 16: SERVICE MANUAL NUMBER 11Transom Ass
Page 19: SERVICE MANUAL NUMBER 118. Connect
Page 25 and 26: SERVICE MANUAL NUMBER 11aREMOVAL, I
Page 27 and 28: SERVICE MANUAL NUMBER 11Sterndrive

Service Manual Number 11 Removal Installation And Adjustments

Create successful ePaper yourself

Delete template?

Save as template?