VS1000+1003 VoIP Speaker Phone - VLSI Solution
VS1000+1003 VoIP Speaker Phone - VLSI Solution
VS1000+1003 VoIP Speaker Phone - VLSI Solution
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>VS1000+1003</strong> <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>VSMPGHH4. USING THE VOIP SPEAKER PHONE4 Using the <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>Before starting using the <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>, please check that the following items areincluded with the package, as shown in Figure 1.1 on page 5:1. <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong> main board.2. Loudspeaker.3. USB cable.4. RS232 programming adaptor.4.1 PreparationBefore starting using the <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>, perform the following initial steps:1. Unwrap the <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong> board, speaker and USB cable.2. Attach the speaker to the board as shown in Figure 1.1 on page 5. Put the speakeras far away from the microphone as possible.Rev. 2.20 2009-12-07 Page 13(30)
Change language