VS1000+1003 VoIP Speaker Phone - VLSI Solution
VS1000+1003 VoIP Speaker Phone - VLSI Solution
VS1000+1003 VoIP Speaker Phone - VLSI Solution
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>VS1000+1003</strong> <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>VSMPGHH9. FURTHER HELP9 Further HelpThe <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong> is a demonstration unit.<strong>VLSI</strong> <strong>Solution</strong> Oy recognizes the needs to tune at least the following parameters foractual, mass-produced units.<strong>VoIP</strong> mode:• Software microphone sensitivity.• Sound pressure level (the default level has been set to be pleasant with the currentdemonstration board and speaker combination at -9 dB of maximum soundpressure).• Optional equalization to optimise speaker frequency response.There are also other features that are to be added to the production version of thesoftware.<strong>VLSI</strong> <strong>Solution</strong> is willing to help to tune these parameters for customers who intend tostart mass production of <strong>VS1000+1003</strong> <strong>VoIP</strong> <strong>Speaker</strong> <strong>Phone</strong>s.NOTE! If you have excessive amount of acoustic echo, i.e. so much signal comes fromyour speakers to the microphone that echo cancellation doesn’t work properly, first readthe document <strong>VoIP</strong> Acoustic Design (VoipAcoustic.pdf), which is provided in the samedirectory as this document!Rev. 2.20 2009-12-07 Page 29(30)