Lutron EcoSystem Programming - Lutron Lighting Installation ...

Programming Guide 177 Select the daylight row to beset.8 Scroll to the desired fixture(selected fixture will flash). Tap+ to add the fixture to the row,or – to remove it. Repeat foreach fixture to be added orremoved from the row.9 Select Done.10 Set the light level to bemaintained throughout the dayfor the row.Tap the down arrow button todecrease the compensationlevel. Doing this will increasethe fixture light output.Tap the up arrow button toincrease the compensationlevel, which will decrease thefixture light output.NOTE: Changes happengradually and may not benoticeable without a light meter.Repeat this procedure to set thedaylight light levels for each rowof fixtures in each daylight sensorgroup.11 Select Done.12 Select Setup Another Sensorto set up another daylightsensor. Or select Done to exit.13 When done, if all fixtures flashand go to high level, tap .7891011