analog to digital converter . . . . . . . . . . . . . . . 4 - UPGNet

351579-YTS-B-0608Table 5: Settable System Parameters (Continued)Address Function Unit Range Default Your Settings474849Exhaust Damper Position for Exhaust Fan toTurn Off (Modulating Only)Economizer Damper Position for Exhaust Fanto Turn On (Non-Modulating Only)Economizer Damper Position for Exhaust Fanto Turn Off (Non-Modulating Only)% Of Damper Position 0-100 20%% Of Damper Position 0-100 60%Percent of EconomizerPosition0-100% 20%50 APS Data Open-Closed Open-Closed Open51 Dirty Filter Switch ON-OFF ON-OFF OFF52 Dirty Filter Switch Data Open-Closed Open-Closed Open53 Cooling Mode Enable ON-OFF ON-OFF ON54 Heating Mode Enable ON-OFF ON-OFF ON55 Fan On Mode with the Sensor Option ON-OFF ON-OFF ON56 Space Setpoint Offset °F -5 to 5 0 degrees57 Metric Operation ON-OFF ON-OFF OFF58 BAS Economizer ON-OFF ON-OFF OFF59 Year Year 00-99 460 Month Month Number 161 Day of Month Day Number 162 Day of Week Day Number 163 Hour Hour 0-23 064 Minute Minutes 0-59 065 SAT (Supply Air Temp) °F -40 to 180 Read Only Read Only66 RAT (Return Air Temp) °F -40 to 180 Read Only Read Only67 OAT (Outside Air Temp) °F -40 to 180 Read Only Read Only68 ST (Space Temp) °F -40 to 180 Read Only Read Only69 OAH (Outside Air Hum) %RH 0 to 100% Read Only Read Only70 RAH (Return Air Hum) %RH 0 to 100% Read Only Read Only71 Occupied Input Enable ON-OFF ON-OFF OFF72 Alarm ArrayRead OnlyRead Only73 Alarm Array Read Only Read Only74 Alarm ArrayThese values represent the last 5 alarm codes inmemory. 72 is latest & 76 oldest.Read Only Read Only75 Alarm Array Read Only Read Only76 Alarm Array Read Only Read Only77 CV/VAV Mode Read Only Flag CV=0 VAV=1 Read Only Read Only78 Hot Gas Reheat ON-OFF ON-OFF OFF79 Hot Gas Bypass ON-OFF ON-OFF OFF80 Compressors Number 2 to 4 Factory Set81 Heat Stages Number 0 to 3 Factory Set82 Duct Static Reading Inches Water 0 to 5.0” Read Only83 Building Pressure Reading Inches Water 0 to 5.0” Read Only84 Low Ambient Kit Installed ON-OFF ON-OFF Factory Set85 Building Static Pressure Sensor Enable ON-OFF ON-OFF Factory Set86 ERV Installed ON-OFF ON-OFF Factory Set87 ERV Unoccupied Fan ON-OFF ON-OFF Factory Set88 Duct Static Shutdown Setpoint Inches Water 0 to 5.0” 4.5”NOTES:For On/Off functions, 1 is ON and 0 is OFFRead only items are readings from sensors which only change as the measured condition changes.Johnson Controls Unitary Products 17