[MI 019-120] I/A Series Mass Flowtubes Models CFS20 ... - Invensys

More documents

Recommendations

Info

MI 019-120 – June 20111. IntroductionTable 1. Reference Documents (Continued)Document No.InstructionsMI 019-132MI 019-133MI 019-179MI 019-140MI 019-141Parts ListsPL 008-704PL 008-733PL 008-735PL 008-752Document DescriptionCFT50 Transmitter Installation, Startup, Configuration, and MaintenanceCFT50 Safety Connection Diagrams (FM, CSA)Instruction – Flow Products Safety Information (available only on websitewww.foxboro.com/instrumentation/tools/safety/flow)I/A Series ® Digital Coriolis Mass Flow Transmitter With HART andMODBUS Communication Protocols Model CFT51I/A Series ® Digital Coriolis Mass Flow Transmitter Model CFT51 SafetyConnection Diagrams (FM, CSA)CFT50 Transmitter Parts ListCFS10 Style B Flowtubes, Sanitary/General, Parts ListCFS20 Style B Flowtubes, Sanitary/General, Parts ListI/A Series ® Mass Flow and Density Meters Model CFT51 Digital CoriolisMass Flow Transmitter with HART or Modbus Communication Protocol2
1. Introduction MI 019-120 – June 2011Standard SpecificationsMass Flow Rate RangeThe mass flow rate range is dependent on the flowtube size. Refer to Table 2 for the mass flow raterange for each flowtube size.Table 2. Mass Flow Rate RangeFlowtubeFlowtube Size Nominal Mass Flow Rate Extended Upper Range (a)Model in mm kg/min lb/min kg/min lb/minCFS10 1/8 3 0.03 to 3.2 0.07 to 7 7 151/4 6 0.09 to 9 0.2 to 20 22 481/2 15 0.4 to 40 0.9 to 90 73 1603/4 20 0.9 to 90 2 to 200 119 2611 25 1.8 to 180 4 to 400 244 5361-1/2 40 4 to 400 9 to 900 607 13352 50 7 to 700 15 to 1500 1023 2250CFS20 1-1/2 40 4 to 400 9 to 900 485 10703 80 18 to 1815 40 to 4000 2040 4500Process Fluid Density RangesMass Flow Rate Ranges(a)The extended upper ranges shown above are based on a process fluid specific gravity of 0.8 and a temperature of212°F (100°C). To find the extended upper range at other specific gravities and temperatures, contact Invensys .Process fluid density ranges of 200 to 3000 kg/m 3 (12.5 to 187 lb/ft 3 ), or specific gravity rangeof 0.2 to 3. Note that a specific gravity of 1 corresponds to a fluid density of 1000 kg/m 3(62.4 lb/ft 3 ).3
Page 1 and 2: InstructionMI 019-120June 2011I/A S
Page 3 and 4: ContentsFigures....................
Page 5 and 6: Figures1 Data Plate Location and Fl
Page 7 and 8: Tables1 Reference Documents .......
Page 9: 1. IntroductionGeneral DescriptionT
Page 13 and 14: 1. Introduction MI 019-120 - June 2
Page 19 and 20: 2. InstallationFlowtube Identificat
Page 21 and 22: 2. Installation MI 019-120 - June 2
Page 27 and 28: 3. WiringThe installation and wirin
Page 29 and 30: 3. Wiring MI 019-120 - June 2011Jun
Page 31 and 32: 3. Wiring MI 019-120 - June 20114.
Page 33 and 34: 4. StartupSizing Your Flowtube and
Page 35 and 36: 5. TroubleshootingRTD Res Low or RT
Page 37 and 38: 6. MaintenanceSanitary End Connecti
Page 39 and 40: IndexCCoil Resistances 5EElectrical

[MI 019-120] I/A Series Mass Flowtubes Models CFS20 ... - Invensys

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?