[MI 019-120] I/A Series Mass Flowtubes Models CFS20 ... - Invensys

MI 019-120 – June 20111. IntroductionApproximate MassFlowtube mass is dependent on flowtube size and end connections used. Refer to Table 3.Table 3. Approximate Flowtube MassFlowtubeModelCFS10CFS20(a) Not available.Flowtube SizemminWith ANSI Class150 Flanged EndsFlowtube Internal Fluid VolumeWith ThreadedEnds3 1/8 (a) 6.3 kg(13.9 lb)6 1/4 9.6 kg8.8 kg(21 lb)(19.4 lb)15 1/2 11.5 kg10.4 kg(25.5 lb)(22.9 lb)20 3/4 18.5 kg16.7 kg(40.5 lb)(36.8 lb)25 1 22.5 kg(a)(49.5 lb)40 1-1/2 53.4 kg(a)(118 lb)50 2 77.6 kg(a)(171 lb)40 1-1/2 24 kg(a)(53 lb)80 3 111 kg(a)(244 lb)With SanitaryEndsFlowtube internal fluid volume is dependent on the flowtube size and the end connections used.Refer to Table 4.Table 4. Flowtube Internal VolumeFlowtubeModelCFS10CFS20(a) Not available.(a)8.8 kg(19.4 lb)10.4 kg(22.9 lb)16.7 kg(36.8 lb)20.3 kg(44.8 lb)49.9 kg(110 lb)71.2 kg(157 lb)(a)99.3 kg(219 lb)Nominal FlowtubeFlowtube Internal Fluid VolumeSize With Flanged/Threaded Ends With Sanitary Endsmm in cm 3 in 3 cm 3 in 33615202540501/81/41/23/411-1/22186732110131591463879341.14206297283484(a)743521111163048188227(a)521689929450240 1-1/2 2621 160 (a) (a)80 3 10,015 611 9632 5884