ECCnet ProSYNC - GS1 Canada

ECCnet ProSYNC User GuideFor more information, see About the Selection Code Field.7. In GTIN Code specify the code and the code type.Unless you are adding unmarked inners, each GTIN entered into ECCnet ProSYNC musthave a unique bar code assigned to it.8. Complete values in the remaining required fields (indicated by a red asterisk (*) andyellow colour).For a description of any field, click the field label. A description appears in a pop-upwindow.9. Click Continue.Product details are verified and, if there are errors, error messages appear.If there are no errors, the GTIN is saved to the system and the remaining product detailpanels appear.10. Complete values in the remaining fields as required.11. Click Save.At the top of the page, a saved status message appears.12. Click Save and Approve.After a compliance check, at the top of the page a save status message appears.Product is added.Add a Product by CloningTo reduce the time required to add a product manually, if a product that has similar attributesto an existing product, you can clone the existing product and edit the clone.For example, if you want to add a product hierarchy of Pallet - Display Shipper - Consumer orBase, start with an existing hierarchy that contains a Pallet - Case - Consumer or Base andchange the Product Type of the Case to Display Shipper.Note: When you clone a GTIN that contains lower level GTINs, the resulting GTIN will containthe entire product hierarchy.To open the Search Results/GTIN Publication page, in Search, specify the type of productthat you want to display.Steps:1. In the Search Results/GTIN Publication list, click a source product GTIN.The product detail page appears.2. Click Clone.16 Copyright © 2013 GS1 Canada