How to Use Intelligent IP Installer - Smarthome

More documents

Recommendations

Info

3.2 UpgradeChoose a network camera, click on Upgradeto upgrade the firmware. You have tokey in the username and password of the administrator to enter the upgrade page.The following screen will display:Choose the firmware image file you want to upgrade and press Upgrade to start. The device willautomatically reboot after upgrade.12
3.3 Factory DefaultChoose a network camera, click on Factory defaultto reset the configurations todefault. You have to key in the user name and password to use the factory default function.Click on OK to continue. The device will automatically reboot after the configurations set to default.13
Page 1 and 2: Intelligent IP Installer
Page 3 and 4: How to Use Intelligent IP Installer
Page 5 and 6: 2. Configuration of Main MenuMain M
Page 7 and 8: Link to IE:After searching Network
Page 9 and 10: Date/Time settings: You can set the
Page 11 and 12: PPPoE settings: You can change the
Page 13: Apply settings: Click on Apply to u
Page 17 and 18: 4. UserThe System page provides you
Page 19 and 20: After loading, you can get configur
Page 21 and 22: 4.2 UserThe Network Camera default
Page 23 and 24: top of TCP/IP) that assures accurat
Page 25 and 26: 4.5 PPPoEUse this when you connect
Page 27: 5. AboutThis page displays Intellig

How to Use Intelligent IP Installer - Smarthome

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?