How to Use Intelligent IP Installer - Smarthome

More documents

Recommendations

Info

3.4 RebootChoose a network camera, click on Rebootto reboot the device. You have to keyin the user name and password to use the reboot function.Click on OK to continue. The device will automatically reboot.14
4. UserThe System page provides you all Network Cameras configurations in the network with product ordownloaded configuration file information, including Info, User, Date Time, TCP/IP, PPPoE and DDNS.Load configuration File:Select From PC File or From Device, the former can load information ofdownloaded configuration file and the latter can load Network Camera configurations in the network.From PC File:Select it and press Load to select configuration location from PC. Note:Configuration file format is * conf.15
Page 1 and 2: Intelligent IP Installer
Page 3 and 4: How to Use Intelligent IP Installer
Page 5 and 6: 2. Configuration of Main MenuMain M
Page 7 and 8: Link to IE:After searching Network
Page 9 and 10: Date/Time settings: You can set the
Page 11 and 12: PPPoE settings: You can change the
Page 13 and 14: Apply settings: Click on Apply to u
Page 15: 3.3 Factory DefaultChoose a network
Page 19 and 20: After loading, you can get configur
Page 21 and 22: 4.2 UserThe Network Camera default
Page 23 and 24: top of TCP/IP) that assures accurat
Page 25 and 26: 4.5 PPPoEUse this when you connect
Page 27: 5. AboutThis page displays Intellig

How to Use Intelligent IP Installer - Smarthome

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?