Fusion FP-188 and FPH-188 - Vinten Radamec

More documents

Recommendations

Info

Fusion FP-188 pedestals and FPH-188 height drives Warning symbols Usage 6 ! CAUTION finger trap ! WARNING! Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘CAUTION’. ELECTRIC SHOCK Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle symbol. FINGER TRAP Where there is a risk of trapping fingers within parts of the product or other equipment mounted to the product, comments appear supported by the finger trap symbol. READ INSTRUCTIONS On encountering the warning triangle and open book symbols it is important that you read this operators guide before using this product or attempting any adjustment or repair. These products are designed for use within television studios to support a payload weighing up to 85 kg (187.4 lb). The total payload must not be exceeded. The FPH-188 and FPH-188 VR height drives can be moved manually, while the FP-188 and FP-188 VR pedestals allow operators to remotely control their movements and positioning around the studio. The product is intended for use by television camera operators, trained to use Vinten Radamec robotic equipment. Do not use this product for any other purpose other than that specified in this usage statement. WARNING! 1. DO NOT attempt to use this product if you do not fully understand how to operate it. 2. DO NOT use this product for any other purpose than that specified in the Usage statement. 3. Maintenance beyond that detailed in this Operators Guide must be performed only by competent personnel. Disposing of used electrical and electronic equipment When you see this symbol on a Vinten Radamec product, it indicates that this product must not be disposed of with household waste. In some countries/EC regions, separate collection systems have been set up to handle electrical and electronic waste products. This product must be disposed of at a collection point for the recycling of electrical and electronic equipment. For more information, visit www.vintenradamec.com. By ensuring this product is disposed of correctly, you will help protect human health and conserve natural resources and the environment.
Declaration of Conformity In respect of the following equipment manufactured by Camera Dynamics Limited: Model Part no. Description manufactured in accordance with the following European Directives: EU Low Voltage Directive 2006/95/EC EU EMC Directive 89/336/EEC EU Pressure Equipment Directive 97/23/EEC by application of the following Harmonised Standards: Operators guide Fusion FP-188 V3952-0003 Manual and robotic pedestal Fusion FP-188 VR V4048-0003 Manual and robotic pedestal Fusion FPH-188 V4049-0003 Manual and robotic height drive Fusion FPH-188 VR V4048-0004 Manual and robotic height drive EN 61000-6-4:2001 Electromagnetic compatibility-Part 6-4: Generic - Emission standards for industrial environments. EN61000-6-2:2001 Electromagnetic compatibility (EMC) Part 6-2: Generic - Immunity standards for industrial environments. EN 61000-3-2:2000 Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16A per phase. EN 61000-3-3:1995 (+A1) Electromagnetic compatibility (EMC) - Part 3: Limits - Limitation of voltage changes voltage fluctuations and flicker in public low voltage supply systems (for equipment with rated current
Page 1: FP-188/FPH-188 Pedestals and Height
Page 4 and 5: Publication Part No. V3952-4985 Iss
Page 6 and 7: Fusion FP-188 pedestals and FPH-188
Page 36: Fusion FP-188 pedestals and FPH-188

Fusion FP-188 and FPH-188 - Vinten Radamec

Create successful ePaper yourself

Delete template?

Save as template?