smart vend pr & pr/pd & slim troubleshooting guide maytag circuit ...

More documents

Recommendations

Info

SLIM RETRO DIP SWITCHES AND WIRINGSlim Daughter Board DIP Switch SettingsDIP-Switch settings for the Maytag CompuTrac2 (PD) Units1-On, 2-On, 3-On, 4-Off, 5-Off, 6-On, 7-On, 8-On, 9-On, 10-Off, 11-Off, 12-OnSLIM Retro Wiring for a Single Maytag Washer or DryerMaytag MachineSmart Vend SLIM ConnectorTo TransformerTo TransformerBlackRedTo Avail 1To Avail 2OrangeBrownTo Enable 1To Enable 2YellowWhiteSLIM Retro Wiring for a Stack Maytag DryerMaytag MachineSmart Vend SLIM ConnectorTo TransformerTo TransformerBlackRedTo Avail 1To Avail 2To Avail 3To Avail 4To Enable 1To Enable 2OrangeBrownGreenBlueYellowWhite
BASIC TROUBLESHOOTINGPR & PR/PD Reader1. Check for a Fault Code Displayed on the Maytag Board2. Test with a User Card3. Attempt to Reprogram the Reader• When reprogramming the reader, the keys are toggled on and off each time theKey Card is inserted4. Change the Reader with a Brand New Reader5. If needed use a machine next to the bad machine to help diagnose the problem, followwhere the problem goes when swapping componentsSLIM Retro Reader1. Check for a Fault Code Displayed on the Reader and the Maytag Board2. Test with a User Card3. Attempt to Reprogram the Reader• When reprogramming the reader, the keys are toggled on and off each time theKey Card is inserted4. Check wiring and connections5. Change the Reader with a Brand New Reader, check DIP Switch Settings on the newReader6. If needed use a machine next to the bad machine to help diagnose the problem, followwhere the problem goes when swapping components
Page 2 and 3: PR & PR/PD READERS DESCRIPTIONSmart
Page 4 and 5: THE PROGRAMMING CARDSKey Card: Card
Page 6 and 7: SLIM RETRO READER SETUP PROCEDURESm
Page 10 and 11: ERROR MESSAGESCARD ERROR 011. Bad s

smart vend pr & pr/pd & slim troubleshooting guide maytag circuit ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?