User's Manual Template - CNC4PC

More documents

Recommendations

Info

6.3 Step 3. Connecting VFDVFD CONNECTORRJ45PIN DESCRIPTION1 ANALOG OUTPUT COMMON (ACM)2 ANALOG OUTPUT (AVI)3 NOT USED4 RELAY 1 NO (Normally Open) CONTACT (ON/OFF)5 NOT USED6 RELAY 2 NO (Normally Open) CONTACT (CW) or (CWW)7 NOT USED8 RELAYS COMMON CONTACTS (DCM)The box is prewired for INTERNATIONAL VFD Mode, if using on US mode, open thebox and move the jumper on the C32.The true max and min speeds of the spindle must be set:6.4 Step 4. Aux 1 / Aux 2 AC Plug.Aux 1 / Aux 2 are 110VAC/220VAC outputs controlled by electromechanical Relays.User’s Manual Page 6
6.5 Step 5. Connecting Probe.Touch probes are wired and preconfigured and just needs to be connected to the backpanel. CNC4PC offers this unit:http://www.cnc4pc.com/Store/osc/product_info.php?cPath=69&products_id=323, but othermay be used as long as the wiring is compatible,Refer to the product’s documentation for additional information:http://cnc4pc.com/Tech_Docs/TP1.pdf6.6 Step 6. Connecting External E-Stop.The external e-stop is optional. If the plug is not present, the e-stop circuit will getclosed. If the plug is put in place, a NC e-stop switch must be used.User’s Manual Page 7
Page 2 and 3: USER'S MANUALTABLE OF CONTENTSPage
Page 4 and 5: 2.0 SPECIFICATIONSMain Voltage Inpu
Page 6 and 7: 5.3 Internal Layout6.0 QUICK START
Page 10 and 11: 6.7 Step 7. Selecting the AC operti
Page 12 and 13: 4. Configure the MPG and ENCODER on
Page 14 and 15: 7.0 WIRING DIAGRAMSUser’s Manual
Page 16 and 17: 9.0 PINOUTPORT PIN CONTROL BOX FUNC

User's Manual Template - CNC4PC

Create successful ePaper yourself

Delete template?

Save as template?