Tucked-Front Blouse - My Label 3D Fashion Pattern Software

More documents

Recommendations

Info

Fabric requirementFabric KeyFabric, right Fabric, wrongsidesideSymbols and Markings KeyCFCBB9Lining, rightsideLining, wrongsideInterfacingCentre <strong>Front</strong>Centre BackSheetnumberingReference points – helpin combining theindividual sheetsGrainMarkingpoints onfront sectionsMarking pointson backsectionsPleating indirection ofarrowMarking of dart ends.(1cm before the darttip)ButtonmarkingThe figure shows one way the pattern pieces can be laid out a folded length of fabric.Since the pattern pieces are created according to your own measurements andpersonal preferences, they may differ in size and shape from the pattern layout.Fabric 140cm wide, folded.Materials and miscellaneousooButtonsInterfacing
Cutting outFabricooooooo2 x centre front2 x side front2 x side back1 x center back to fabric fold2 x sleeves1 x outer collar stand to fold1 x upper collar to foldInterfaced pieceso 1 x inner collar stand to foldo 1 x undercollar to foldo 2 x cuffTip: Leave ample seam allowance when cutting out the front neckline and shoulder. Theneckline and shoulders will be cut to proper size after the tucks have been stitched.Sewing instructions:Preparation:Lay out paper pattern pieces on fabric as per the cutting-layout illustration. Transfer allmarkings to the fabric after the pieces have been cut out. Fuse interfacing to collar,collar stand, cuffs and button placket.<strong>Front</strong>:Mark the pleat depths (1.5cm) before stitching.Edgestitch foot no. 10 or the seam guide are great aids when stitching the tucks.Straight-stitch all four tucks in a continuous line in each case. Sew with normal stitchlength from the shoulder to the top buttonhole, secure. Then close the remaining seamwith the longest possible stitch length (basting stitch). Iron tucks towards armhole.With right sides facing, stitch side and centre front together. Neaten the seamallowances together and iron towards side seam.Doublefold the buttonhole placket part under – first 1cm, then 3cm. Edgestitch the foldof the buttonhole placket.
Page 3 and 4: Lengthways inserts on front and bac
Page 5: Marking the tucksPleating the tucks
Page 9 and 10: With right sides facing, pin outer
Page 11: Hem:Doublefold hem, press and edges

Tucked-Front Blouse - My Label 3D Fashion Pattern Software

Create successful ePaper yourself

Delete template?

Save as template?