Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aileron Servo InstallationRequired Parts• Wing panel (left and right)• Ball end w/hardware (4) • Control horn (4)• 3-inch (76mm) linkage (4) Step 3Tip the wing so the root is facing down and lower theweight through the wing.Required Tools and Adhesives• JR ® MatchBox (2) • Phillips screwdriver• Ruler• Nut driver: 1/4-inch• Hex wrench: 3/32-inch • String w/weight• Servo extension, 24-inch (610mm) (2)• 1 1 / 2-inch Single Side Alum Adj.Spline Servo Arm (4) Step 1Secure a 24-inch (610mm) servo extension to theoutboard aileron servo. Step 4Tie the string to the servo extension. Step 2Tie a weight to a piece of string. Lower the weight into theopening for the outboard aileron servo.8