4501 - Champ Hydraulic Side/End Lift - Auto Body Toolmart
4501 - Champ Hydraulic Side/End Lift - Auto Body Toolmart
4501 - Champ Hydraulic Side/End Lift - Auto Body Toolmart
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>4501</strong> - <strong>Champ</strong> <strong>Hydraulic</strong><strong>Side</strong>/<strong>End</strong> <strong>Lift</strong>Made In USAFrame Straightening Equipment Inc.The basic lift will arrived already assembled.There is some minor assembly shown in these instructions.WARNINGRead all assembly instructions completely before using lift. Follow all instructions.Failure to so could result in damage to lift or vehicle or injury to user. Do notexceed weight capacity of 3,00lbs.<strong>Auto</strong> <strong>Body</strong> <strong>Toolmart</strong><strong>Champ</strong> Frame Straightening Equipment, Inc.2545 Millennium Dr., Elgin, IL 60124 (800) 382-1200www.autobodytoolmart.com
1. 2.The jack beam adapter has a slot one side.The adapter attaches to the cross beamadapter with the supplied bolt.3.4.5.Tighten bolt securely.Slide the assembled adapter into the liftbeam of the lift. Lock it into place with thesupplied locking pin.Your lift is now ready to use. Make sure that the lift pads are placed in an approved lifting sectionof the car. Contact the vehicle manufacturer if you are not sure where to place the lifting pads.
Change language