Joker XL manual - Pichler

More documents

Recommendations

Info

JOCKERInstruction ManualSecure.INSTALLING THE MAIN LANDING GEAR.PARTS REQUIRED4x15mm5 x35mm1. The blind nuts are already mounted insidethe fuselage.M3M3 lock nut .55mm2. The holes in the landing gear should beto accept the mounting bolts.Landing gear.3. Using the hardware provided, mountthe main landing gear to the fuselage.4x15mmSecure.11
JOCKERInstruction ManualBottom side.5. A drop of C/A glue on the wheel collarscrews will help keep them from coming loseduring operation.Repeat the process for the other wheel.Secure.4. Assemble and mounting the wheel pantsas shown in the following pictures.5x 35mmBottom side.ELEVATOR INSTALLATION.SERVO INSTALLATION.1. Install the rubber grommets and brasscollets into the elevator servo. Test fit the servointo the servo tray.2. Mount the servo to the tray using themounting screws provided with your radio system.12elevatorservo
Page 1 and 2: PICHLERJoker XLAnleitung / ManualR/
Page 3 and 4: ASK-14 Anleitung / ManualSonderzube
Page 5 and 6: JOCKERInstruction ManualC/A glueAIL
Page 7 and 8: JOCKERInstruction ManualFLAP SERVOS
Page 9 and 10: JOCKERINSTALLING ELECTRIC MOTOR.See
Page 11: JOCKERInstruction ManualA+B EpoxyPL
Page 15 and 16: JOCKERInstruction ManualBottom side
Page 17 and 18: JOCKERInstruction ManualMOUNTING TH
Page 19 and 20: JOCKERInstruction ManualPush.Epoxy
Page 21 and 22: JOCKERInstruction Manual5) When you
Page 23 and 24: JOCKERInstruction ManualLeft wing.R

Joker XL manual - Pichler

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?