Joker XL manual - Pichler

JOCKERInstruction ManualRudder servo left sideVERTICAL INSTALLATION.Vertical stabilizer installationSee picture below.2.Mark the shape of the vertical on the leftand right side on the rudder using a felt-tippen.Mark line.1. Slide the rudder into the fuselage as sameas picture below.3.Now, remove the rudder and using amodeling knife, carefully cut just inside themarked lines and remove the film of the rudder.Just as you did with the horizontal stabilizer,make sure you only press hard enoughto cut the film, not the balsa rudder.Top side.Removecovering17