Handbook - Eurotherm Ltda

T820 HANDBOOK3.5.1 Gaining access (Cont.)4. Using the Navigation keys select the required level ofaccess,• LOCKED• OPERATOR• COMMISSION• ENGINEERConfirm using the Return key.The pick-list disappears, revealing the Security Accesspage again, showing the selected level (LOCKED,OPERATOR, COMMISSION or ENGINEER) in the‘New Level’ field.Security AccessLOCKEDOPERATORCOMMISSIONENGINEER5. Select the Password field (shown as asterisks) using theNavigation keys and confirm using the Return key.The asterisks are removed and Password field starts toflash.Note. A Password is not required when selectinga lower security access level, e.g.ENGINEER to OPERATOR.Security AccessCurrently: OPERATORNew Level: OPERATORPassword: ********[CHANGE]6. Enter each character/numeric of the required Password,using the alphanumeric keys. Each key press selects thenext alphanumeric in the list. The selectedalphanumeric is only entered in the password when thealphanumeric list disappears.G1 2 BC4 HIAJ5 KLDM3 EFN6ONote. A Password is entered following the sameprinciples as the mobile phone, usingmultiple keys presses to select the letter ornumber required.Erroneous characters can be deleted by selecting therelevant character and pressing the appropriatealphanumeric key.U7 8PQRST. 0VWXYZ±Security Access9Currently: OPERATORNew Level:WXYZ9OPERATORPassword: *_[CHANGE]Chapter 3Page 3 - 10HA029131Issue 3 Feb 08