Download File - Hawk Measurement Systems!

Microwave Pulse Switch - Presence & Absence DetectionMANUALRev 1.0Safety InformationWarrantyFCC REGULATIONS:Qualifications -The Federal Communications Commission imposesstrict requirements on radiating sources such as theMPS/MPR, MRS/MRR/MRA,MRS-H/MRR-H/MRAMicrowave Pulse Systems. This unit is tested to, andmeets these requirements, which include operating frequencyand stability, harmonic and spuriousgenerationsand power output. The Hawk Microwave Pulse Systemcomplies with FCC Rules Part 15 for industrial controls.No licenses or approvals are required to use the system.Requirements -(A) OSHA - 10mW/cm2of radiated power.(B) ANSI - 5mW/cm2 of radiated power.Hawk control products will be replaced, put in good operatingcondition, or the purchase price refunded, at theoption of Hawk, free of charges except transportation,if defective in their manufacture, labeling, packaging ,orshipping, and if notice of said defect is received by Hawkwith in one year from the date of shipment.The cost of such replacement, repair or refund or priceshall be the exclusive remedy for any breach of warranty,and Hawk shall not be liable to any person for consequentialdamages for injury or commercial loss resultingfrom any breach of any warranty particular purpose, andmakes no other warranty, express or implied, includingimplied warranty arising from course of dealing or usageof trade.The Hawk MPS/MPR, MRS/MRR/MRA, MRS-H/MRR-H/MRA Microwave Pulse Systems have 20µW/cm2 ofradiated power.Note: The Hawk MPS/MPR, MRS/MRR/MRA,MRS-H/MRR-H/MRA Microwave Pulse Systemsare well belowthe stringent safety standards required by both theabove governing bodies. It is regarded as a totally SAFElevel control and may be used with no special precautions.Sultan 234 Series33Microwave Series