Download File - Hawk Measurement Systems!

More documents

Recommendations

Info

Microwave Pulse Switch - Presence & Absence DetectionMANUALRev 1.0Specifications Integral - MPS - MPR (con’t)Input Voltage:115Vac nominal, 100-130Vac acceptable, 50-60Hz240Vac nominal, 200-270Vac acceptable, 50-60HzAC supplys lined fuse: 100mA, 250VacBoth MPS & MPR units include terminals for 24Vdc supplypowerPower Consumption:MPS < 2VAMPR < 3VAPower Density:Rated from emitter (MPS) to receiver (MPR) at approximately20μW/cm . No interconnecting wiring betweenemitter and receiver. Complies with FCC Title Rules Part15. Caution sign posting not required.Transmitted Signal:Frequency: 10.525 GHz, + 25 MHzAverage Power Density:20RW/cm2 typical Linearly Polarized FieldBeam angle (3dB) approximately 30 degrees (conservative).Range:Maximum range under ideal conditions: 105m (340 ft.)Expected maximum practical range: 65m (215 ft.)Minimum range under ideal conditions: 10cm (4 in.)Expected minimum practical range: 20cm (8 in.)Note: Minimum ranges are dependent onapplication conductivity.L.E.D. Indicators:MPS: power on (green)MPR: power on (green), signal detect (red), relay state(amber)Mounting:1. 3” male NPT thread or four 6mm (.250in.) blind boltholes in flange.a) 3” weldments supplied for standardintegral mounting.b) Flange is used for remote mount in highvibration applications - isoiation shockmounts are available.2. 4” weldments with PTFE (teflon), UHMW, ceramic,firebrick windows.3. Ceramic window assemblies - rectangular.4. Firebrick window assemblies available on custombasis - rectangular - circular.5. 2” NPT sight glass window.6. Waveguides - custom assemblies available.Adjustments:MPS: Test switch - momentary push-buttonMPR: Single turn coarse and single turn fine adjustmentpotentiometers for set point.Relay time delays adjustable from 100ms to 30 secondsvia two independent on/signal make and off/signal breakpotentiometers with automatic reset.Fall-safe:Switch selectable - presence or absence of material.High level fail-safe position: relay is activated when materialis present.Low level fail-safe position: relay is activated when nomaterial is present.Temperature:MPS & MPR: -30°C to +65°C (-20°F to +150°F)Note: for higher temperature applications, remote mountingwith windows is necessary. Custom waveguide assembliescan also be provided.UHMW Window: +80°C (+176°F)Ceramic Window: Consult factory for manufacturer’sspecifications.Firebrick Assemblies: Consult factory for manufacturer’sspecifications.Cabling Entry(ies):MPS: 1 X 10mm (3/8” NPT)MPR: 2 X 10mm (3/8” NPT)Relay Contact Output:MPR: SPDT - 10amps @ 250Vac resistive10amps @ 125Vac resistiveEnclosure:VALOXSAA LISTEDMeets Class 2, Div 1, Group E, F & G (DlP-Dust IgnitionProof) classification.FM Approval Pending.Windows: UHMW (ultra-high molecular weight) polyethylenestandard PTFE (teflon) available,(see part numbering).Sealing:IP67 (NEMA 4X)Shipping Weights:MPS: 4.5kg (10 lbs.)MPR: 4.5kg (10 lbs.)
Microwave Pulse Switch - Presence & Absence DetectionMANUALRev 1.0Specifications - Doppler SwitchDoppler Switch - MDSInput Voltage:240Vac nominal, 200-270Vac acceptable, 50-60 Hz115Vac nominal, 100-130Vac acceptable, 50-60 HzAC supply line fuse: 100mA, 250VacUnits have terminals for 24Vdc supply power.Power Consumption:
Page 1 and 2: A higher level of performanceMicrow
Page 3 and 4: Microwave Pulse Switch - Presence &
Page 5: Microwave Pulse Switch - Presence &
Page 11 and 12: PPRV1(A=B)RV2RV1(A=B)RV2LOLOHIHISer
Page 35: Microwave Pulse Switch - Presence &

Download File - Hawk Measurement Systems!

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?