Manual - LP2824 - logmaster

Media Length SensingMOVIEBefore you connect the printer to your computer, make sure that the printeris in proper working order. You can do this by making the printer measuremedia and print a status printout.After loading media, perform thefollowing procedure that measures thelength of each label or tag. Make sure thetop cover of the printer is closed.1. Make sure that printer power is off.2. Press and hold the feed button.3. Turn printer power on.4. When the status light blinks, releasethe feed button.UKQ2933H U V4.28.19Serial port : 96,N,8,1Image buffer size: 1032KFmem:000,0K,060.9K avlGmem:000K,0331K avlEmem:000K,0331K avlI8,0,001 rY JF WYS2 D07 R0 24,000 ZT UNq1200 Q 1500,036Option:oRO06 10 16now in DUMP5. The printer advances the media tomeasure and verify the length ofindividual labels or tags. The printerthen prints a status summary andremains in diagnostic dump mode.6. To begin normal operation, tap thefeed button. The printer prints "out ofDUMP" and advances a label.If the status light remains amber or red oryou cannot get this printout, refer toTroubleshooting on page 33.out of DUMP980481-001A 13