910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

4. Mounting the sewing unit4.1 Mounting the oil pan2341– Lay the oil pan 1 on the table top 3, align it and screw it tightthrough the two through-bores 2 with two wood screws.– Push the screw (in the accessories) through the drill-hole 4 andtighten it with washer and nut.12
4.2 Assembly of the sewing unit4 3 2 18 7 6 5The small parts for setting up the sewing unit are included in theaccessories.– Place the sewing unit 1 on the oil pan 4.– Fasten the sewing unit on the left and on the right with the fixtures5 and 8.For this purpose screw the fixtures 5 and 8 tight with the screws 9,the sheets 11 and the counternuts 10.– Insert the machine head support 6 in the drill-hole of the table top.– Tilt the sewing unit sideways.– Run the connecting cables 2 under the table top through theopening 3.– Tilt the sewing unit back.2995810111013
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15: 3.7 Adjusting the working height122
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21 and 22: 5. Connecting the plug connections
Page 23 and 24: 5.3 Wiring2In order to make it poss
Page 25 and 26: 8. Mounting the eye protection4321C
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31 and 32: 10.2 Seam programIf no seam program
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

Create successful ePaper yourself

Delete template?

Save as template?