910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

10.3 Sewing testAfter finishing the assembly work a sewing test should be made.– Plug the mains plug in.– Wind up the bobbin thread (see operating instructions chapter 7.5)Caution: Risk of injury!Switchthemainswitchoff.Thread in the needle thread and the bobbin thread only with the sewingmachine switched off.– Thread in the needle thread (see operating instructionschapter 7.1).– Insert the bobbin thread winder (see operating instructionschapter 7.6).– Switchthemainswitchon.The control is initialised.– Select the material to be processed.– Make the sewing test first at low speed and then at continuouslyincreasing speed.– Check whether the seam pattern corresponds to the desiredrequirements.If the requirements are not met, alter the thread tensions (seeoperating instructions chapters 7.2 and 7.7).If necessary, also check the adjustments indicated in the serviceinstructions and correct them, if required.– Check the oil level at both inspection glasses during the operationof the sewing unit.28
11. Optional equipment11.1 Sewing lamp3 2 1For the sewing unit <strong>910</strong> the sewing lamp 1 (order no.9822 510026) and the table clamp 3 (order no. 9822 510027) areavailable.– Clamp the sewing lamp on the table top 2.– Push the plug in the socket under the table top.229
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21 and 22: 5. Connecting the plug connections
Page 23 and 24: 5.3 Wiring2In order to make it poss
Page 25 and 26: 8. Mounting the eye protection4321C
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31: 10.2 Seam programIf no seam program

910 aufst - Durkopp Adler AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?