910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

9. Oil lubricationCaution: Risk of injury !Oil can cause skin eruption.Avoid a longer contact with the skin.Wash yourself thoroughly after a contact.ATTENTION !The handling and disposal of mineral oils is subject to legalregulations.Deliver used oil to an authorized collecting station.Protect your environment.Be careful not to spill any oil.Fill up the oil reservoirs exclusively with lubricating oil DA-10 or anequivalent oil with the following specification:– Viscosity at 40° C: 10 mm 2 /s– Ignition point: 150° CDA-10 can be bought at the sales points ofDÜRKOPP-ADLER <strong>AG</strong> under the following parts numbers:250 ml container: 9047 0000111-Litre container: 9047 0000122-Litre container: 9047 0000135-Litre container: 9047 0000149.1 Filling up oil124 3Oil reservoir for lubricating the sewing unit– Fill up oil through the drill-holes 1 and 4.– Check the oil level at the inspection glasses 2 and 3.The oil level must be above the red mark of both inspectionglasses.22
9.2 Oiling wicks and felt part (connecting rod)2 1ATTENTION !When assembling the machine and after longer idle times the wicksand the felt part 1 have to be soaked with some oil.2– Screw off the bobbin plate.– Soak felt 1 and 2 with oil.– Put on the bobbin plate and tighten.23
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21 and 22: 5. Connecting the plug connections
Page 23 and 24: 5.3 Wiring2In order to make it poss
Page 25: 8. Mounting the eye protection4321C
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31 and 32: 10.2 Seam programIf no seam program
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?