910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

5.2 Plug connections at the multiple pin strip (15-fold)7612345Connect the plug connections of the sewing unit, the control panel andthe reference value transmitter as follows:– Plug of light barrier /sensorto plug connection 1 (REF-signals)Note: The 8-pole plug is encoded.– Plug of magnets to plug connection 6 (PWM)Note: The 8-pole plug is encoded.– Plug of encoder signal sewing motorto plug connection 2 (encoder sewing motor)– Plug of control panelto plug connection 3 (control panel)– Plug of control elements (pedal switch)via adapter 5 to plug connection 4(I/O 1-8)– Plug 7 for safe connection to the socket (SaveStop)18
5.3 Wiring2In order to make it possible to tilt the machine head back the cablesleading from the head through the opening in the table top either to themultiple pin strip (15-fold) at the control box or to the cable duct mustbe long enough. For this purpose the cables must be laid to form agreat bend 2 with the help of some cable clips.26. Mounting the thread reel holder– Insert the thread reel holder in the drill-hole of the table top andscrew it tight with nuts and washers.Mount and align the thread reel arms and the thread guides.The thread reel arms and the thread guides have to be positionedvertically one upon the other.19
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21: 5. Connecting the plug connections
Page 25 and 26: 8. Mounting the eye protection4321C
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31 and 32: 10.2 Seam programIf no seam program
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

Create successful ePaper yourself

Delete template?

Save as template?