910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

7. Changing the sewing foot and the fabric clamps2 16 5 4 3The sewing unit <strong>910</strong> is delivered with two sewing feet.Caution: Risk of injury !Switchthemainswitchoff.Change the sewing equipment only with the main switch switched off.Changing the sewing foot– Unscrew screw 2.– Change sewing foot 1.– Insert screw 2 and tighten.Disassembling the upper fabric clamp– Unscrew screws 4.– Remove fabric clamp 3.Disassembling the lower fabric clamp– Unscrew screws 6.– Remove clamping plate 5.The assembly is done in reverse order.20
8. Mounting the eye protection4321Caution: Risk of injury !The sewing unit must not be operated without eye protection.2– Tighten the eye protection 1 at the sewing unit 4 with the fasteningangle 2 and the two screws 3.21
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21 and 22: 5. Connecting the plug connections
Page 23: 5.3 Wiring2In order to make it poss
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31 and 32: 10.2 Seam programIf no seam program
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?