910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

4.5 Mounting the cover hood3 2 14– Place the cover hood 2 on the fitting spring 4 from above.– Lay the cable 3 of the control panel in the gap 5 of the cover hoodbefore.– Screw the cover hood on the sewing unit with two screws throughthe drill-holes 1.3 516
5. Connecting the plug connections to the control box5.1 Plug connections at the multiple pin strip (4-fold)1232Connect the plug connections of the sewing unit as follows:– Plug connection 1 sewing motor plug (4-pole)– Plug connection 2 step motor for the X-drive (5-pole)– Plug connection 3 step motor for the Y-drive (5-pole)17
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19: 4.4 Potential compensation13 2- Fro
Page 23 and 24: 5.3 Wiring2In order to make it poss
Page 25 and 26: 8. Mounting the eye protection4321C
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29 and 30: 10. Putting into operation10.1 Inst
Page 31 and 32: 10.2 Seam programIf no seam program
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

Create successful ePaper yourself

Delete template?

Save as template?