910 aufst - Durkopp Adler AG

More documents

Recommendations

Info

– Pull the dongle 2 out now.ATTENTION !The software must be compatible with the machine class.If the software version does not correspond to the machine class, donot confirm.Switch the machine off and repeat the loading process with the correctsoftware version.2110.1.3 Dongle update via InternetThe dongle can be updated via the Internet. For this purpose call upthe homepage of Dürkopp <strong>Adler</strong> <strong>AG</strong> “www.duerkopp-adler.com”. Underthe category “Download Area” and “Software” you will find thedownload service programs and the corresponding machine software.The instructions available on this page describe the exact procedurefor updating the dongle.26
10.2 Seam programIf no seam program is stored in the control, the following message willbe indicated when the sewing unit is switched on for the first time:– Press the “ESC” key.The main menu appears.– Create a new seam program by teach-in or load a seam programfrom the dongle (see operating instructions).227
Page 1 and 2: 910CNC-Nähanlage für freie Nahtko
Page 3 and 4: ForewordThis instruction manual is
Page 5 and 6: IndexPage:Part 2: Installation Inst
Page 7 and 8: 1. Scope of deliveryThe scope of de
Page 9 and 10: 3. Mounting the stand and the contr
Page 11 and 12: 8- Place the control box 8 on the u
Page 13 and 14: 3.5 Mounting the stand and the refe
Page 15 and 16: 3.7 Adjusting the working height122
Page 17 and 18: 4.2 Assembly of the sewing unit4 3
Page 19 and 20: 4.4 Potential compensation13 2- Fro
Page 21 and 22: 5. Connecting the plug connections
Page 23 and 24: 5.3 Wiring2In order to make it poss
Page 25 and 26: 8. Mounting the eye protection4321C
Page 27 and 28: 9.2 Oiling wicks and felt part (con
Page 29: 10. Putting into operation10.1 Inst
Page 33 and 34: 11. Optional equipment11.1 Sewing l

910 aufst - Durkopp Adler AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?