1766-RM001A-EN-P MicroLogix 1400 Programmable Controllers ...

30 I/O ConfigurationInput filtering is configured using RSLogix 500/RSLogix Microprogramming software. To configure the filters using RSLogix 500/RSLogix Micro:1. Open the Controller folder.2. Open the I/O Configuration folder.3. Open slot 0 (controller).4. Select the Embedded I/O Configuration tab.The input groups are pre-arranged. Select the filter time required for eachinput group. Apply a unique input filter setting to each of the inputgroups:MicroLogix 1400 Input GroupsController MicroLogix 1400Input Groups • 0 and 1• 2 and 3• 4 and 5• 6 and 7• 8 and 9• 10 and 11• 12 and 13• 14 and 15• 16…23• 24 to xxxx (reserved)The minimum and maximum response times associated with each inputfilter setting can be found in your controller’s User Manual.Analog InputsThe MicroLogix 1400 -L32BWAA, -L32AWAA, and -L32BXBA support4-channel, 12-bit resolution analog input with four 12-bit resolutionanalog input channels. These channels are single-ended (unipolar) circuitsand accept 0…10V DC.Input words 4…7 contain the value of analog inputs (Word 4: analoginput channel 0, Word 5: analog input channel 1, Word 6: analog inputchannel 2, Word 7: analog input channel 3).Publication 1766-RM001A-EN-P - October 2008