1766-RM001A-EN-P MicroLogix 1400 Programmable Controllers ...

Communications Instructions 437If the target device is a ControlLogix, FlexLogix or CompactLogixcontroller with an Ethernet interface, then enter in the interface’s IPaddress in the first row of the “To Address” column, press the computer’sInsert key to add a hop. Select ControlLogix Backplane and enter in thebackplane slot number for the controller (always 0 for FlexLogix andCompactLogix, 0-16 for ControlLogix) in the second row of the “ToAddress” column as shown below under the MultiHop tab.If the target device is a ControlLogix controller with an ControlNetinterface, then enter in the interface’s IP address of the 1756 ENET modulein the first row of the “To Address” column, press the computer’s Insertkey to add a hop. Select ControlLogix Backplane and enter in thebackplane slot number of the ControlNet Interface module (0-16 forControlLogix) in the second row of the “To Address” column as shownbelow under the MultiHop tab. Double click on the From Device underthe ControlLogix Backplane and select the 1756-ControlNet Interface.Enter the address of the ControlNet Interface using 1747-KFC15.Publication 1766-RM001A-EN-P - October 2008