RxT-BTP-R580_UserGuide.pdf - Support

More documents

Recommendations

Info

BTP-R580 User’s Manuale) Error indicatorIndicating some error status. Under normal conditions, ERROR LED is always off. Undersome error conditions(Cover Open、Cutter Error、Print head is overheating、Input voltage isabnormal), ERROR LED will flash.f) Paper indicatorIndicating paper status. Under normal conditions, PAPER LED is always off. When the paperstatus changes (paper end or paper near end), PAPER LED will flash.g) Paper end sensorThe paper-end sensor is used to detect whether the paper roll is out of paper.Notices:The paper guide is an indispensable part of the printer and should be kept with the printer.3.2 Error LED and Buzzers1) Error LEDLed Status DescriptionPower Indicator (Green) (POWER)Error Indicator (Red) (ERROR)Paper Indicator (Red) (PAPER)2) Description of LED and Error StatusOnOffOffFlashOnFlashOffPrinter is powered onPrinter is powered offPrinter is in normal status(except paper end or paper near end)Printer is in error statusPrinter Paper is normalMacro definition is runningPrinter is in normal statusError information ERROR LED PAPER LED BuzzerPrint head is overheating Six times Off Long-Short-LongInput voltage is abnormal Five times Off Short-Short-LongCutter Error Four times Off Long-Short-LongCover Is Open Three times Off Short-Long-ShortPaper End Twice On Short-Short-ShortPaper near end Off OnFinding mark error or verify failed Flashing continuously OffCaution: The temperature of the print-head is detected by means of a thermistor sensor. If thetemperature of the printhead becomes higher than 65 0 C, the protection circuit of theprinter will force the printer to stop printing.9
4 InstallationBTP-R580 User’s Manual4.1 UnpackingCheck whether all items, that are listed on the packing list are present and in a good condition.If any items are damaged or missing, please contact your dealer.4.2 Printer installation1) The printer should be installed on a flat and stable horizontal surface.2) The printers should be away from any water source.3) Do not place the printer on a surface exposed to vibration or risk from impact.4) Ensure that the printers can be grounded safely.5) During operation and maintenance of the printer there should be sufficient space around theprinter in accordance with the dimensions as shown in fig. 4.2-1.4.3 Connecting the Power Adapter1) Ensure the printer power is turned off.2)Insert the power cord into the power socket on the backside of the printer.3)Fix the power cable cord in the printer with a clip as shown in Fig. 4.3-1.Caution:When connecting or disconnecting the power cord, always hold the plug and avoid draggingit by force.Do not pull on the power cord, otherwise the cord may be damaged or broken, causing a risk10
Page 1 and 2: USER’S MANUALReceipt PrinterBTP-R
Page 3 and 4: BTP-R580 User’s Manual6.4 ETHERNE
Page 5: BTP-R580 User’s ManualWarnings an
Page 9 and 10: BTP-R580 User’s ManualCutting tim
Page 11: 3 Outline and PartsBTP-R580 User’
Page 15 and 16: 4.6.2 Load/replace a paper roll1) P
Page 17 and 18: BTP-R580 User’s Manual(website: w
Page 19 and 20: 6 Interface signalBTP-R580 User’s
Page 21 and 22: BTP-R580 User’s Manual• Support
Page 23 and 24: 7 TroubleshootingBTP-R580 User’s
Page 25 and 26: ‣ Parameter setting by Feed butto
Page 27 and 28: ‣ Setting Mechanism and HardwareB
Page 29 and 30: BTP-R580 User’s Manual‣ Paper N

RxT-BTP-R580_UserGuide.pdf - Support

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?