TIBCO ActiveMatrix Runtime UDDI Server Administrator's Guide

Configuring the uddi.war File in the Interactive Mode| 33Configuring the uddi.war File in the Interactive ModeAfter installing TIBCO ActiveMatrix Runtime UDDI Server, the commands usedto configure the uddi.war file must be run before deployment. See TIBCOActiveMatrix Runtime UDDI Server Installation for information about installingTIBCO ActiveMatrix Runtime UDDI Server.1. Open a command prompt, and change the path to:TIBCO_HOME/RuntimeUDDIServer/3.0/bin2. Use the interactive mode to configure the uddi.war file.Run: srvconfigIf there is no build.properties file under theTIBCO_HOME/RuntimeUDDIServer/3.0/template directory, the commandexecution will switch to the interactive mode and will prompt the followingquestions:Please choose the following options:(1): Configure All(2): Configure the Database(3): Configure the Container(4): Configure the Server Domain(5): Configure the Server Host and Port(6): Configure the Server Root User and Password(7): Configure SMTP for the Subscription Email Notification(8): Configure the Folder for the Server Log File(s)(9): Configure the Customized JAAS Module(10): Configure the Product Name and Logo for UIYour Option: ([1], 2, 3, 4, 5, 6, 7, 8, 9, 10)The default option is option (1).The first time you configure the uddi.war file you must choose option (1) toconfigure all the items.Configure AllIf you choose option (1), items (2) through (10) listed above will be configured inorder. Then the uddi.war file will be generated.If you need to reconfigure the items (2) through (10), the following promptsappear on the screen:TIBCO ActiveMatrix Runtime UDDI Server Administrator’s Guide