Hawke Transit System catalogo

H A W K E M A R I N E T R A N S I T SThe HMX FrameFor general use. A Hawke compression tool(Ref.981) is required for use with all´x`designated frames.The HMFX FrameHas a 60mm wide flange and isavailable in the same materials and finishesas HMX frames. For overall dimensions ofHMFX frames add 120mm (allowance forflange) to those given for standard HMXframes.The HMOX FrameA removable end allows the frame to beinstalled around existing cables and pipes.The HMEX FrameA standard HMX frame extended using awelded collar.For use in corrugated bulkheadsor to fit the frame above deck level. For overalldimensions of HMEX frames add 20mm toexternal measurements of Standard HMXframes.The HMBX FrameFor sealing cable routes in uninsulated HOrated areas or similar applications. Add20mm to external dimensions of standardHMX frames to determine overall width andheight.Also used in 2 hour Jet Fire applicationsThe HMRX FrameFor stressed area applications, end filletpieces with radius corners are added tothe HMX frame.20Marine FramesWeld RemovalWhere aesthetic considerations or specificmounting conditions are a requirement allprotruding welds can be ground flush, thisprocess alters standard manufacturingtechniques and must be requested whenordering frames. Standard frames should notbe modified on site as this could potentiallyweaken welding joints.www.hawke-hts.com