Slide bearings - Wolf Kunststoff-Gleitlager GmbH
Slide bearings - Wolf Kunststoff-Gleitlager GmbH
Slide bearings - Wolf Kunststoff-Gleitlager GmbH
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CCCCCC12.2.3.3.1. Working life at point stressAt point stress (bushing is standing, screw is rotating)the expected working life at point stress L pis calculatedby means of formula (25).L P∆D -∆h -se max0,06 • v • S G[25]Screw cavityPrefaceContentsin which:L P = working life for point stress [h]∆D = permissible increase of bearing clearance [µm]v = sliding speed [m/min]S G = total wear rate [µm/km] taken from chapter12.2.3.1.∆h = occuring screw cavity [µm]se max = max. installation bearing clearance [µm]12.2.3.3.2. Working life at peripheral stressAt peripheral stress (bushing is rotating, screw isstanding still) the working life L uis longer than that atpoint stress.As rule of thumb applies:LL = 2 • LUin which:U =P[26]working life at peripheral stress [h]LP= working life at point stress [h]MaterialoverviewIndex <strong>Slide</strong> <strong>bearings</strong> <strong>Slide</strong> <strong>bearings</strong> Conditions ofTribologyMathematical Design(with collar) (cylindrical) installationexample guidelines<strong>Wolf</strong> <strong>Kunststoff</strong>-<strong>Gleitlager</strong> <strong>GmbH</strong> • Heisenbergstr. 63 - 65 • 50169 Kerpen-Türnich • Tel. 02237/9749-0 • Fax. 02237/9749-2039