LCD Monitor User Manual EW2430 EW2730

More documents

Recommendations

Info

3. Connect the audio cable.To Input Audio SignalsConnect the provided audio cable between the socket onthe rear of the monitor (Line In) and your computeraudio outlet.To check the available audio inputs that go with eachvideo source, see Video sources and the availableaudio inputs on page 34.To Output Audio SignalsYou are provided with the following options to outputaudio from the monitor:• You may connect headphones to the headphone jackfound on the back side of the monitor. See picture on theright.• If you prefer using external speakers, please also useanother audio cable (usually supplied with the speakers)to connect the monitor (Line Out) to the input/Line Injack of the speaker.• Or you can output audio using the built-in speakers onthe monitor.The output priority of the audio signals detected on your monitor is headphone jack, Line Out socket, andthe built-in speakers. Your monitor scans for available sockets and outputs audio signals in this order ifaudio cables are connected properly.A headphone should be connected to the headphone jack only; connection to other jacks may causedamage to the headphone. If you prefer to output the audio signals to external speakers or other soundsystems, use Audio Line Out on the monitor.12 How to assemble your monitor hardware
4. Connect USB Devices.I. Connect the USB cable between the PC and the monitor(via the upstream USB port at the back). This upstreamUSB port transmits data between the PC and the USBdevices connected to the monitor.IPDIF-OUTTV OUTSDIF-OUTII. Connect USB devices via other USB ports(downstream) on the monitor. These downstream USBports transmit data between connected USB devices andthe upstream port.See picture on the right.II5. Connect the power cable to the monitor.Plug one end of the power cord into the socket labelledon the rear of the monitor. Do not connect the otherend to a power outlet just yet.6. Connect-to and turn-on the power.Plug the other end of the power cord into a power outletand turn it on.Picture may differ from product supplied for your region.Turn on the monitor by pressing the power key.Turn on the computer too, and follow the instructions inGetting the most from your BenQ monitor on page16 to install the monitor software.To extend the service life of the product, we recommendthat you use your computer's power managementfunction.How to assemble your monitor hardware13
Page 1 and 2: LCD MonitorUser ManualEW2430EW2730
Page 3 and 4: Table of ContentsCopyright ........
Page 5 and 6: Audio CableUSB CableVideo Cable: DV
Page 7 and 8: ConnectionThe following connection
Page 9 and 10: Installing the battery1. Turn over
Page 11: You should position the monitor and
Page 15 and 16: Using the monitor wall mounting kit
Page 17 and 18: How to install the monitor on a new
Page 19 and 20: How to install on Windows 7 system1
Page 21 and 22: How to install on Windows XP system
Page 23 and 24: 7. How to adjust your monitorThe co
Page 25 and 26: Main menu modeYou can use the OSD (
Page 27 and 28: H. Position Adjusts the horizontalp
Page 29 and 30: Color - Press ENTER to enter the Co
Page 31 and 32: Senseye DemoDynamicContrastDisplay
Page 33 and 34: Audio menuAvailable menu options ma
Page 35 and 36: System menuAvailable menu options m
Page 37 and 38: OSD LockPrevents all the monitorPre
Page 39 and 40: 8. TroubleshootingFrequently asked
Page 41: USB devices are not working:• Che

LCD Monitor User Manual EW2430 EW2730

Create successful ePaper yourself

Delete template?

Save as template?