EXSULATION® S5000 Mineral Wool Slab Non Combustible ... - Dryvit

Exsulation® S5000Step #1 Step #2Step #3EXS.0.0.0763.5mmmin.Install AquaFlashSystem at sill (seenote 2)Install sill panflashingInstall DryvitAquaFlash Meshembedded inAquaFlash at headand over upturnedpan flangesStep #4Step #5Apply AquaFlashMesh andAquaFlash overFlashingNotes:1. The AquaFlash® System is acombination of AquaFlash Liquidused in conjunction withAquaFlash Mesh to sealsubstrates around windows,doors and other openings.Installflashingsat head2. Install AquaFlash System(including diagonal "butterflies")onto sill and allow to dry.3. Alternatively, Dryvit FlashingTape or EIFS tape may be used.Install DryvitAquaFlash Meshembedded inDryvit water-resistivebarrier coating atjambs.Refer to EXS.0.0.08for jamb detailR-002-07-08Rough Opening and Sill Preparation - AquaFlash SystemDRYVIT SYSTEMS CANADA129 Ringwood Drive PO Box 1268Stouffville, Ontario L4A 8A2800-263-3308www.dryvit.com®The architecture, engineering and design of the project using the Dryvit products is theresponsibility of the project's design professional. All systems must comply with localbuilding codes and standards. This detail is for general information and guidance onlyand Dryvit Systems Canada specifically disclaims any liability for the use of this detailand/or for the architecture, design, engineering or workmanship of any project. Thedesign professional determines, at its sole discretion, whether this detail or a functionallyequivalent alternative is best suitedfor the project. Use of a functionally equivalent detaildoes not violate Dryvit's warranty. This detail is subject to change without notice.Contact Dryvit Systems Canada to ensure you have the most recent version.