EXSULATION® S5000 Mineral Wool Slab Non Combustible ... - Dryvit

Exsulation® S5000Notes:EXS.0.0.211. Dryvit recommends thatground floor applicationsand all facades exposed toabnormal stress, hightraffic, or deliberate impacthave the base coatreinforced with Panzer® 15or 20 mesh prior toStandard Plus mesh.Location of high impactzones should be indicatedon contract drawings.2. Locate insulation boardssuch that board edges donot align with corners ofpenetration.3. Apply a piece of 240 mm (91/2") x 300 mm (12") detailreinforcing mesh diagonallyat each corner.Mineral woolinsulation slab4. Install Mechanical Fixingsas per EXS.0.0.03.Wrap insulation slab withDryvit Detail ReinforcingMeshDryvit Detail Reinforcing Mesh240 mm (9 1/2") x 300 mm (12")(typ.)R-002-07-08Wall Penetrations®DRYVIT SYSTEMS CANADA129 Ringwood Drive PO Box 1268Stouffville, Ontario L4A 8A2800-263-3308www.dryvit.comThe architecture, engineering and design of the project using the Dryvit products is theresponsibility of the project's design professional. All systems must comply with localbuilding codes and standards. This detail is for general information and guidance onlyand Dryvit Systems Canada specifically disclaims any liability for the use of this detailand/or for the architecture, design, engineering or workmanship of any project. Thedesign professional determines, at its sole discretion, whether this detail or a functionallyequivalent alternative is best suitedfor the project. Use of a functionally equivalent detaildoes not violate Dryvit's warranty. This detail is subject to change without notice.Contact Dryvit Systems Canada to ensure you have the most recent version.