EXSULATION® S5000 Mineral Wool Slab Non Combustible ... - Dryvit

Exsulation® S5000EXS.0.0.02AApplication Sequence1. Apply Backstop NT overGrid Tape.2. Apply Dryvit secondarybarrier onto approvedsubstrate sheathing.3. Dryvit AquaFlash® appliedover Dryvit water-resistivebarrier coating atfoundation transition.24. For added drainage applyDryvit adhesive in verticalnotched trowelconfiguration (1/2" x 1/2" x2" o/c) over the secondarybarrier and allow to dry.1610 mm (2'-0") max.34200mm (8") min.R-002-07-08Foundation with Drainage Strip - Application SequenceDRYVIT SYSTEMS CANADA129 Ringwood Drive PO Box 1268Stouffville, Ontario L4A 8A2800-263-3308www.dryvit.com®The architecture, engineering and design of the project using the Dryvit products is theresponsibility of the project's design professional. All systems must comply with localbuilding codes and standards. This detail is for general information and guidance onlyand Dryvit Systems Canada specifically disclaims any liability for the use of this detailand/or for the architecture, design, engineering or workmanship of any project. Thedesign professional determines, at its sole discretion, whether this detail or a functionallyequivalent alternative is best suitedfor the project. Use of a functionally equivalent detaildoes not violate Dryvit's warranty. This detail is subject to change without notice.Contact Dryvit Systems Canada to ensure you have the most recent version.