request for letters of interest - Broward Sheriff's Office

TECHNICAL PROVISIONS PAGE 19Project Manager, is submitted by CONTRACTOR.3.4.5.5. Contractor shall not be authorized to begin mobilization at the Project siteuntil the Construction Schedule is approved by BSO.3.4.5.6. Shop Drawings: Provide newly-prepared information, on reproductive sheets,with graphic information at accurate scale (except as otherwise indicated),with name of preparer indicated (including firm name). Show dimensions andnote which are based on field measurement. Identify materials and productsin the work shown. Indicate compliance with standards, and specialcoordination requirements. Do not allow construction and shop drawingcopies without appropriate final "Action" markings by BSO to be used inconnection with the work.3.4.5.7. Submit five (5) blue-line or black-line prints; three (3) will be returned.3.4.5.8.. Specifications and Product Data: Collect required data into one submittal foreach unit of work and mark each copy to show which choices and options areapplicable to project. Include manufacturer's standard printedrecommendations for application and use, compliance with standards,application of labels and seals, notation of field measurements that have beenchecked, and special coordination requirements. Maintain at least one set ofproduct data (for each submittal) at project site, available for reference byBSO's Project Manager and others.3.4.5.9. Submittals: Do not submit product data, or allow its use on the project, untilcompliance with requirements of contract documents has been confirmed.Submittal is for information and record, unless otherwise indicated. Initialsubmittal is final submittal unless returned promptly by BSO and marked withan "Action" which indicates an observed non-compliance. Submit 5 copies.3.4.5.10. Samples: Provide units identical with final condition of proposed materials orproducts for the work. Include "range" samples (not less than units) whereunavoidable variations must be expected, and describe or identify variationsbetween units of each set. Provide full set of optional samples where BSOselection is required. Prepare samples to match BSO's sample where soindicated. Include information with each sample to show generic description,source or product name and manufacturer, limitations, and compliance withstandards. Samples are submitted for review and confirmation of color,pattern, texture and "kind" by BSO. BSO will test samples (except asotherwise indicated or requested) for compliance with other requirements.