request for letters of interest - Broward Sheriff's Office

TECHNICAL PROVISIONS PAGE 333.7.1.7.3. When a special warranty is required to be executed by theContractor, or the Contractor together with a subcontractor,supplier or manufacturer, prepare a written document that containsappropriate terms and identification, ready for execution by therequired parties. Submit a draft to BSO for approval prior to finalexecution.3.7.1.7.4. Form of Submittal: At Final Completion, compile two copies ofeach required warranty and bond properly executed by theContractor, or by the Contractor and subcontractor, supplier, ormanufacturer. Organize the warranty documents into an orderlysequence based on the table of contents of Project manuals.3.7.1.7.5. Bind warranties and bonds in heavy-duty, commercial quality,durable 3-ring vinyl covered loose-leaf binders, thickness asnecessary to accommodate contents, and sized to receive 8 1/2" by11" paper.3.7.1.7.6. Provide heavy paper dividers with celluloid covered tabs for eachseparate warranty. Mark the tab to identify the product orinstallation. Provide a typed description of the product orinstallation, including the name of the product, and the name,address and telephone number of the installer.3.7.1.7.7. Identify each binder on the front and the spine with the typed orprinted title WARRANTIES AND BONDS, the Project title orname, and the name of the Contractor.3.7.1.7.8. When operating and maintenance manuals are required forwarranted construction, provide additional copies of each requiredwarranty, as necessary, for inclusion in each required manual.END OF SECTION 3.7