Opcode OMS Version 2.3 User Manual from 1996 - House of Synth

More documents

Recommendations

Info

To continue: Click the Options button.The AppleTalk Options dialog box appears.Figure 3: AppleTalk Options Check the desired options, then click OK.If you check Always leave it on, without asking, then OMS will never againprompt you with the AppleTalk dialog. Use this option with extreme caution—remember that AppleTalk interferes with MIDI data reception.If you check Turn it back on when done with MIDI, then AppleTalk is automaticallyre-launched when you quit all OMS-compatible applications. In the AppleTalk alert box, click Turn it Off.OMS Setup remembers whether you want AppleTalk on or off, and future alertsdisplay your previous choice as the default (highlighted) button.You’ll see the dialog box shown in Figure 4.Figure 4: Disconnect AppleTalk Dialog Box Disconnect your AppleTalk network, then click OK.Ch 2: Creating a New Studio Setup Document - 12 - OMS 2.3 for Macintosh
SEARCHING FORMIDI DEVICESIf you’ve never created a Studio Setup document (using eitherCustom or Easy setup), then you’ll see the dialog box shown inFigure 5.If you’ve already created a Studio Setup document, but wish tocreate a new one, choose File>New Studio Setup to open the dialogbox shown in Figure 5.Figure 5: Configure OMS Dialog Click OK to proceed.The following dialog box appears.Figure 6: OMS Driver Search Dialog Box Check the box next to each serial port that’s connected to a MIDI interface.You should check only those serial ports that you’ll use for MIDI. Click Search.OMS scans the selected ports, looking for any MIDI devices connected to them. Italso scans your Macintosh looking for MIDI cards (such as a SampleCell orMacProteus) and other “Virtual Synthesizers” (such as QuickTime MusicalInstruments).Ch 2: Creating a New Studio Setup Document - 13 - OMS 2.3 for Macintosh
Page 5 and 6: MANUALCONVENTIONSThis manual uses a
Page 7 and 8: If you are updating from an older v
Page 9 and 10: DriverFunctionEnables OMS to work w
Page 11 and 12: FileFunctionA component of OMS that
Page 13: CREATING YOUR FIRST STUDIO SETUP DO
Page 18 and 19: ANATOMY OF THE STUDIO SETUP DOCUMEN
Page 20 and 21: QuickTime Music DriverThis driver i
Page 22 and 23: Select the appropriate clock freque
Page 24 and 25: Keep the MacProteus MIDI Manager dr
Page 26 and 27: DEFININGMANUFACTURERAND MODELYou’
Page 28 and 29: MIDI Synchronization check boxesChe
Page 30 and 31: Choose Edit>Delete.OMS Setup remove
Page 32 and 33: CONNECTINGDEVICES TO AMIDI INTERFAC
Page 34 and 35: The actual MIDI studio has the K200
Page 36 and 37: Click the M1 MIDI Out arrow to disc
Page 38 and 39: By using a MIDI merger, you could c
Page 40 and 41: ADDING A MIDIPATCHBAY TOTHE STUDIO
Page 42 and 43: MIDI Port NumericalsFigure 33: Stud
Page 44 and 45: Click the On radio button to turn o

Opcode OMS Version 2.3 User Manual from 1996 - House of Synth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?