Opcode OMS Version 2.3 User Manual from 1996 - House of Synth

The actual MIDI studio has the K2000’s MIDI Out jack connected tothe MIDI interface and both device’s MIDI In jacks connected to theMIDI interface. To modify your Studio Setup to show the correctconnection: Click the MIDI Out arrow to the left of the Proteus/2.OMS Setup removes the cable from the Studio Setup document. Your StudioSetup document now accurately reflects the cabling in your MIDI Studio.DISCONNECTING MIDI DEVICESIf you disconnect a device in your actual studio, you should also disconnectit in your Studio Setup document. To do so: Click both directional arrows to the left of the MIDI device you wish to disconnect.Click both directional arrowsto disconnect a MIDI deviceOMS Setup disconnects the MIDI device and moves it to the top of the StudioSetup document.Disconnected device moved totop of Studio Setup documentThis is better than deleting the device because it remains in yourStudio Setup document. Then, if you reconnect the device at a laterdate, you need only re-connect it in the Studio Setup document, aswell.Ch 4: Connecting Devices in the Studio Setup Document - 32 - OMS 2.3 for Macintosh