Opcode OMS Version 2.3 User Manual from 1996 - House of Synth

By using a MIDI merger, you could combine the outputs of both keyboards,so that either could be used as a MIDI controller.To MacFigure 27: Connecting a MIDI MergerTo indicate the use of an external MIDI merger in the Studio Setupdocument, simply connect the MIDI outputs from both mergeddevices to the MIDI interface as shown in Figure 28.Figure 28: Studio Setup Indicates Use of a MIDI MergerNotice that both the K2000 and the M1 can send MIDI data to theinterface. The MIDI merger does not appear in the Studio Setup document,but its function is represented by the two MIDI cablescoming from the two MIDI devices.Ch 5: Special Studio Setup Techniques - 36 - OMS 2.3 for Macintosh