User's Manual - Minarik

More documents

Recommendations

Info

10 InstallationRG25U ConnectionsAC line and motor connectionsUse 14 AWG or 16 AWG standard wire for connecting theline and the armature. When connecting the line, standardsrequire installation of a fuse. See page 7 for the details on fusesizing.The RG25UA does not have a field output.Figure 6. RG25U AC Line and Motor Connections
Installation11Speed adjust potentiometer connectionsThe motor can operate in one direction (unidirectional) or intwo directions (bidirectional) depending on how the speedadjust potentiometer is connected to the drive.Connect the speed adjust potentiometer as shown inFigure 7(a) for speed control in one direction.Connect the speed adjust potentiometer as shown inFigure 7(b) for speed control in two directions. The motordoes not rotate when the wiper is in the center position.Turning the wiper CW from the center position causes themotor to rotate in one direction, while turning the wiper CCWfrom the center position causes the motor to rotate in theopposite direction.Refer to the Application Notes section (page 23) for additionalspeed adjust potentiometer connections.50K ohmSpeed Adjust PotentiometerFigure 7a.Unidirectional Operation50K ohmSpeed Adjust PotentiometerFigure 7b.Bidirectional Operation
Page 1 and 2: RG SeriesModels:RG25URG51UASCR, Adj
Page 3 and 4: Safety Warnings• This symbol den
Page 5 and 6: iiiCalibration 19MAX SPD . . . . .
Page 7: vTablesFig Description Page1. Line
Page 10 and 11: 2DimensionsFigure 1. RG25U Dimensio
Page 12 and 13: 4Regenerative DrivesMost non-regene
Page 14 and 15: 6InstallationASSUMPTIONS: Minarik d
Page 16 and 17: 8 InstallationScrew terminal blockC
Page 20 and 21: 12 InstallationRG51UA ConnectionsAC
Page 22 and 23: 14Block DiagramFigure 10. RG25U/RG5
Page 24 and 25: 16OperationBefore applying power1.
Page 26 and 27: 18 OperationRegenerative decelerati
Page 28 and 29: 20 CalibrationIf the time it takes
Page 30 and 31: 22CalibrationDBThe deadband trimmer
Page 32 and 33: 24 Application NotesOptional speed
Page 34 and 35: 26 Application NotesConnect two spe
Page 36 and 37: 28 Application NotesUse a single po
Page 38 and 39: 30 TroubleshootingMotor does not ru
Page 40 and 41: 32Replacement PartsReplacement part
Page 42 and 43: 34 Certificate of ComplianceAC Line
Page 44 and 45: 36 Certificate of ComplianceWhether
Page 46 and 47: 38Notes
Page 48: Other drives from Minarik Corporati

User's Manual - Minarik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?