User's Manual - Minarik

More documents

Recommendations

Info

22CalibrationDBThe deadband trimmer potentiometer determines the timethat will elapse between the application of current in onedirection before current is applied in the opposite direction.The deadband trimmer potentiometer affects theresistance that a motor has to changes in shaft position atzero speed. It does this by applying AC voltage to the motorarmature.Deadband is factory calibrated to approximately the3 o’clock position for 60 Hz AC line operation. Recalibratethe deadband to the 9 o’clock position for 50 Hz AC lineoperation. See Figure 14 for recommended deadband settings.Figure 14. Deadband Settings
Application Notes23RG25U/RG51UA Connections to other <strong>Minarik</strong> devicesFigure 15. RG25U/RG51UA Connection toDLC100(DLC200), DLC300(DLC400), and PCM4
Page 1 and 2: RG SeriesModels:RG25URG51UASCR, Adj
Page 3 and 4: Safety Warnings• This symbol den
Page 5 and 6: iiiCalibration 19MAX SPD . . . . .
Page 7: vTablesFig Description Page1. Line
Page 10 and 11: 2DimensionsFigure 1. RG25U Dimensio
Page 12 and 13: 4Regenerative DrivesMost non-regene
Page 14 and 15: 6InstallationASSUMPTIONS: Minarik d
Page 16 and 17: 8 InstallationScrew terminal blockC
Page 18 and 19: 10 InstallationRG25U ConnectionsAC
Page 20 and 21: 12 InstallationRG51UA ConnectionsAC
Page 22 and 23: 14Block DiagramFigure 10. RG25U/RG5
Page 24 and 25: 16OperationBefore applying power1.
Page 26 and 27: 18 OperationRegenerative decelerati
Page 28 and 29: 20 CalibrationIf the time it takes
Page 32 and 33: 24 Application NotesOptional speed
Page 34 and 35: 26 Application NotesConnect two spe
Page 36 and 37: 28 Application NotesUse a single po
Page 38 and 39: 30 TroubleshootingMotor does not ru
Page 40 and 41: 32Replacement PartsReplacement part
Page 42 and 43: 34 Certificate of ComplianceAC Line
Page 44 and 45: 36 Certificate of ComplianceWhether
Page 46 and 47: 38Notes
Page 48: Other drives from Minarik Corporati

User's Manual - Minarik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?