User's Manual - Minarik

34 Certificate of ComplianceAC Line FiltersIn addition to EMI/RFI safeguards inherent in the RG51UA design,external filtering is required.Minarik requires the Corcom ® AC line filters listed in Table 3. Usemodel 5VR1 with drives rated for 3 ADC or below, and model 20VV1with drives rated for 10 ADC or below.Table 3. AC Line FiltersCorcom ® Model Number 5VR1 20VV1Rated Current 5 A 20 AInductance 1.032 mH 0.88 mHCapacitanceLine to Line 0.303 mF 0.303 mFLine to Ground 0.011 mF 0.011 mFDischarge Resistor 680 KW 680 KWWire the AC line filter within 0.25 meters of the drive. Theground connection from the filter must be wired to solidearth ground (resistance less than 500 ohms), not machineground. This is very important!If the end-user is using a CE-approved motor, the correct filter fromTable 3 is all that is necessary to meet the EMC directives listedherein.