Tab 16.book - Piti Group

TeSys GV7Manual Starter and Protectorwww.SquareD.comFor the most up-to-date informationThe GV7 devices are 3-pole, horsepower-rated manual starters. They include a manual disconnect,Class 10 ambient-compensated, bi-metallic thermal overload relay, and an instantaneous magnetic tripmechanism in one compact unit.Either starter can be used alone for local, manual control of a single motor or can be wired in front of acontactor to provide a complete, remotely operated motor control circuit. The GV7 devices are particularlyeffective when multiple motor circuits are to be housed in one panel.The GV7 are UL Listed for group installations for motors with individual full-load currents up to 220 A.The interrupting rating for group installations is 25 kA at 480 V for the GV7RE and 65 kA at 480 V for theGV7RS. The instantaneous trip is set at 13 times the thermal trip setting and is not adjustable.The GV7M manual starters feature either a toggle or rotary handle to indicate the ON or OFF state of thedevice, and when the unit has been tripped by overload, short-circuit, undervoltage, or shunt trip.GV7AC01GV7AD111GV7RE20GV7AS055ThermalSettingMaximum Horsepower Ratings230 Vhp3Ø460 Vhp575 VhpCatalogNumber acd25-35 kAIC 65 kAIC12–20 5 10 15 GV7RE20 $417.00 GV7RS20 $542.0015–25 7.5 15 20 GV7RE25 417.00 GV7RS25 542.0025–40 10 30 30 GV7RE40 417.00 GV7RS40 542.0030–50 15 30 40 GV7RE50 417.00 GV7RS50 542.0048–80 30 60 75 GV7RE80 417.00 GV7RS80 542.0060–100 30 75 100 GV7RE100 456.00 GV7RS100 594.0090–150 50 100 150 GV7RE150 502.00 GV7RS150 652.00132–220 75 150 200 GV7RE220 502.00 GV7RS220 652.00a GV7RE20-GV7RE100 have 25 kAIC @ 480 Vac.b GV7RE150-GV7RE220 have 35 kAIC @ 480 Vac.c GV7 starters are supplied without lugs. Order lugs from table below.d Group installation: Maximum fuse and circuit breaker size is 1200 A.PriceCatalogNumber bcdAuxiliary contact blocks (auxiliary contact functions depends on location inside the device)Description Mounting Location Max. No. of Blocks Contact Type Catalog Number PriceStandardInstantaneous2 per device N.O. + N.C.Trip Indication Inside Device 1 per device N.O. + N.C. GV7AE11 $23.80Fault Indication 1 per device N.O. + N.C.Low LevelInstantaneous2 per device N.O. + N.C.Trip Indication Inside Device 1 per device N.O. + N.C. GV7AB11 23.80Fault Indication 1 per device N.O. + N.C.Voltage TripsDescription Mounting Location Max. No. of Blocks Voltage Catalog Number PriceUndervoltage Trip Inside Device 1 per deviceShunt Trip Inside Device 1 per deviceFault Indication Inside Device 1 per device48 Vac 50 Hz GV7AU055110–130 Vac 50/60 Hz GV7AU107200–240 Vac 50/60 Hz GV7AU207380–440/480 Vac 50/60 Hz GV7AU387525 Vac 50 Hz GV7AU52548 Vac 50 Hz GV7AS055110–130 Vac 50/60 Hz GV7AS107200–240 Vac 50/60 Hz GV7AS207380–440/480 Vac 50/60 Hz GV7AS387525 Vac 50 Hz GV7AS52524–130 GV7AD111110–415 GV7AD112Price$64.0064.0072.00Wiring AccessoriesDescription Application Catalog Number PriceIEC STYLE CONTACTORSAND STARTERSGV7AP03GV7AE11Box LugsSold in lots of 3 for GV7Rt20–150e GV7AC021 $13.10 eachSold in lots of 3 for GV7Rt220e GV7AC022 16.60 eachPhase Barriers, Bus Bars & ShroudsTerminal Extension Kit Increases center distance between phases to 45 mm GV7AC03 31.10Terminal Shroud Kit Covers terminal connections for touch safe protection GV7AC01 27.90Phase Barriers Provides maximum phase separation at connection points GV7AC04 31.10Insulating Barriers Provides insulation between connectors and backplate GV7AC05 16.60Busbars and CoversOperating Handles and Accessoriese Wire size: GV7AC021—#14–3/0; GV7AC022—#14–350 kcmil.Connect to LC1F115–185 contactor GV7AC06 31.10Connect to LC1F225–265 contactor GV7AC07 31.10Black rotary operating handle with black legend plate (mounts directly on device) GV7AP03 57.00Red rotary operating handle with yellow legend plate (mounts directly on device) GV7AP04 57.00Conversion accessory to mount device directly on panel door GV7AP05 9.30Black rotary operating handle with black legend plate and extension kit (185–600 mm) GV7AP01 68.00Red rotary operating handle with yellow legend plate and extension kit (185–600 mm) GV7AP02 68.00Padlocking device for toggle handle (max. 38 mm padlocks) GV7V01 9.3016GV7AC021GV7V01Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 16-57–16-58For additional information, reference Catalog #2520CT0001R9/02.16-563/9/04I11DiscountSchedule© 2004 Schneider ElectricAll Rights Reserved3/9/04