Tab 16.book - Piti Group

AccessoriesAK5 Panel Busbar SystemAK5JB143AK5PA231AK5PA232SAK5PC33www.SquareD.comFor the most up-to-date informationThe AK5 pre-fabricated bus bar system provides a quick and easy method of mounting control devices.All components are finger safe, UL Listed, CSA approved and CE marked. Although the AK5 system canbe screw mounted onto any type of support, it must be mounted on the AM1DL201 DIN rail whencomponent mounting plates incorporating a tap-off are used. When using tap-offs, the nominal operatingcurrent of the bus bar (160 Amperes @ 35°) must not be exceeded.160 Ampere Three Phase Busbar SystemMaximum number of mounting platesTap-off Standard Width Plate Extension Plate LengthIN mm IN mm IN mmCatalog Number Price1.42 36 2.13 54a 2.80 71 IN mm6 4 2 13.39 344 AK5JB143 $140.009 6 3 17.64 452 AK5JB144 177.0012 8 4 21.85 560 AK5JB145 187.0015 10 5 26.05 668 AK5JB146 230.0024 16 8 38.69 992 AK5JB149 262.0027 18 9 42.90 1100 AK5JB1410 360.00a Auxiliary contacts on INTEGRAL 18 will reduce maximum number of devices–see table below.Mounting Plate Tap-offPlugs into busbar mounted on AM1DL201 DIN rail.WidthThermalIN mm Current AmperesApplication Catalog Number Price2.13 54 25 A INTEGRAL 18 & 32 & GV2 AK5PA231 $ 65.002.13 54 25 A GV2 & Contactor AK5PA232 80.004.25 108 25 A GV2 & Reversing Contactor AK5PA232S 137.00Bus Tap-offPlugs into busbar for wiring to a separately mounted device.WidthLength ofThermalLeadsCurrent AmperesIN mm IN mmCatalog Number Price1.42 36 32 A 9.84 250 AK5 PC33 $15.301.42 36 32 A 39.37 1000 AK5 PC33L 25.20Extension PlatesUsed to mount wider components. Bolt to standard mounting plates (after DIN rails are removed).WidthIN mmApplication Catalog Number Price2.80 71 INTEGRAL 32 AK5PE17 $13.102.80 71 GV & Reversing contactor AK5PE27 17.50AK5PE17Mounting RailMust be used for mounting plates with tap-offs.Description75 mm Omega RailMaterial andSurface Treatment2 mm steel with10 microns ofzinc chromateDepth Length CatalogNumberPricemm mm15 2000 AM1DL201 $13.70IEC STYLE CONTACTORSAND STARTERSAM1DL201Approvals:IEC 439, UL, CSA, DNV, LROSFile E161251CCN NMTRFile LR 89150Class 6228-01Maximum Number of Devices Per Busbar System bAK5 Busbar SystemDeviceUsed withJB143 JB144 JB145 JB146 JB149 JB1410INTEGRAL 18 Only 4 6 8 10 16 18INTEGRAL 18 with 1 aux. block 4 6 8 10 16 18AK5PA231 Mounting Plate INTEGRAL 18 with 2 aux. blocks 3 4 6 7 12 14INTEGRAL 18 with 3 aux. blocks 2 4 5 6 10 12AK5PE17/27 extension plate 3 4 6 8 13 14AK5PC33/PC33L ... 6 9 12 15 24 27b The AK5 system may be used with GV2 and GV3 devices in combination with LC1D contactors and INTEGRAL 32 devices.16For additional information, reference Catalog #8502CT0101.16-608/30/04I11DiscountSchedule© 2004 Schneider ElectricAll Rights Reserved8/30/04