MEMOLUBÂ® User's Guide - PLI, LLC

More documents

Recommendations

Info

cartridge does not empty or not in the predicted timing, check the following:• Is the tubing clogged? Use a hand grease gun to clear tubing.• Is one of the outlets of the distributor block obstructed? Use a hand grease gun andmaintenance adapter (available through PLI) to flush the distribution block untilgrease runs freely from all ports in equal amounts.• Is tubing damaged? Replace tubing.• Is counter-pressure higher than 290psi? Only use tubing with ¼” (6mm) innerdiameter or more, fittings with 1/8” NPT threads or higher, and a maximum 12-point distribution block. When counter-pressure is between 290psi and 350psi, theMEMOLUB ® HPS will empty at a slower pace.• At working temperature, the base-oil viscosity of the grease is higher than what’sdescribed in 5.2 Table of pipe and tubing lengths. Use a grease appropriate foryour application.• The constant temperature where the MEMOLUB ® HPS is used is too cold for thestandard alkaline battery pack. Use cold weather (Lithium) battery packs inextreme cold situations (refer to section 1.4.2: Battery Packs).8.4 Lubricant does not get to the applicationIf the MEMOLUB ® HPS does function and empty correctly, however no lubricant isgetting into the component:a) Tubing is damaged and should be replaced.b) A fitting is not correctly screwed in or the seal may be missing.9 WarrantyPLI, LLC warrants the MEMOLUB® Lubricator against defects in material andworkmanship under normal use for two years from the date of original purchase. Thiswarranty extends to the original purchaser only and can not be transferred. During thewarranty period PLI, LLC will, at its option, repair the lubricator with new orreconditioned parts, replace the unit with a new or reconditioned lubricator or refund thepurchase price. Repaired or replaced lubricators are warranted for 90 days or for theremainder of the original warranty period, whichever is longer. All lubricators or partsreturned under this warranty become the property of PLI, LLC. The warranty does notapply to defects or damage resulting from abnormal use, misuse, mishandling, accident ortampering. PLI, LLC is not responsible for consequential damages beyond replacement orrefund of amount paid. It is the user’s responsibility to regularly check the correctfunctioning of the product. This warranty is valid only in the USA, Canada and Mexico.MEMOLUB ® HPS User’s Guide Page 19 of 39 PLI, LLC
APPENDIXMEMOLUB ® HPS User’s Guide Page 20 of 39 PLI, LLC
Page 4: 1 The MEMOLUB ® HPS1.1 OverviewThe
Page 11 and 12: attery power and under control of t
Page 13 and 14: shaped lock washer) inserted into t
Page 15 and 16: 6.2 Opening and Closing the MEMOLUB
Page 17 and 18: 6.4 Installing an Oil CartridgeInst
Page 19: 7.4 Mounting with the Progressive D
Page 23 and 24: MEM LUB ® Lubrication SystemsDimen
Page 25 and 26: MEM LUB ® Lubrication Systems Fine
Page 27 and 28: MEM LUB ® Lubrication Systems Mult
Page 29 and 30: MEM LUB ® Lubrication Systems 2-Po
Page 31 and 32: MEM LUB ® Lubrication Systems Main
Page 33 and 34: MEM LUB ® Lubrication SystemsInsta
Page 35 and 36: MEM LUB ® Lubrication SystemsHazar
Page 37 and 38: MEM LUB ® Lubrication Systems Exte
Page 39 and 40: MEM LUB ® Lubrication Systems MEMO

MEMOLUBÂ® User's Guide - PLI, LLC

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?